Washing machine will not heat the water, if there was a serious failureWashing machine will not heat the water, if there was a serious failure often occurs in the form of failure that the washing machine does not heat water. How to determine this point? It is enough to turn on the device after 15 minutes to make a hand to the glass on the hatch. If it is warm or even hot, the unit is working properly, but otherwise, you need to understand what causes what stiralka does not heat water.

Reason why it does not heat the water in the washing machine

Situations where no heated water in a washing machine, can occur frequently enough, regardless of which model is acquired, expensive or cheap. If the automatic machine does not heat the water in the wash.

The main causes of breakage of the washing machine, which does not reach the water, can be properly predetermined program or broken PETNThe main causes of breakage of the washing machine, which does not reach the water, can be properly predetermined program or broken PETN

There are several reasons for this failure:

  • Incorrectly set program;
  • Violation in connecting device;
  • PETN has a dangling chain;
  • Broken heating element itself;
  • Faulty programming;
  • Broken thermostat.

Check the accuracy of heating function can be independently, but experts do not recommend to perform it without the wizard. There are several reasons. Master has experience. In the pros have all the necessary equipment for the diagnosis. The skilled artisan will be able to quickly find the problem and fix it.

What should I do if the washing machine does not heat water

Most often, the main cause of breakage is low quality water used. If machine washing, but ceased to be heated, then first of all do not panic and try to find the problem. You must first find out whether that is really hot or no water in the washing machine. Many are accustomed to that after washing the laundry gets cold, as it passes the rinsing process. That is right, but because we must try to capture the moment of checking hot water during washing. It is sufficient for 15 minutes to verify the operation of the apparatus, as mentioned above, by applying a hand drum glass.

If the washing machine does not heat the water, then it is better to seek help from professionalsIf the washing machine does not heat the water, then it is better to seek help from professionals

There are old-fashioned stiralki who simply washed in cold water.

After that you should choose the washing mode and the temperature, which corresponds to it. In some devices, the laundry is possible to exhibit the temperature manually, allowing you to adjust the level of heating the water on their own, without relying on automation.

Cold water, which eliminates damage to the material, often blurred:

  • Synthetics;
  • Wool;
  • Curtains.

Then you need to check the correctness of the machine connection. Not uncommon is that if the device is not properly connected, the device will be in a chaotic manner include various modes, such as drain water, set water rinsing and heating. The sequence will be broken, and that will affect the fact heats the water in the wash or not.

As a multimeter to check the temperature sensor in a washing machine

What to do, and why it does not work, the heating in the washing machine? If faced with such a problem, it is worth paying attention to whether the defective heating element and temperature sensor. The trouble is, when broken device for washing clothes, could come to a completely different machines.

For example:

  • Indesit;
  • Samsung;
  • Bosch.

To check the temperature sensor in a washing machine, you must use a special meterTo check the temperature sensor in a washing machine, you must use a special meter

Initially, to test a malfunction in the temperature control, you need to find it. To do this, turn off the electricity to the machine from the network device to conduct the analysis and remove the product. It should be noted that much easier to pull the thermistor, as it is located in the cavity of PETN.

Typically, the heating elements arranged below stiralki.

To remove the need to carry thermistor opening back cover stiralka, disconnecting the wires from the sensors that are located on the outer surface of the temperature regulator, loosening of the screws that hold the heating element, pulling of the last thermistor.

Once removed when the sensor requires the use of the meter to conduct a resistance measurement. For this tuning is performed multimeter to measure resistance. Accession multimeter probes operating from the sensor contacts and when the temperature ᵒS 20, the resistance will be equal to 6000 ohms. Next is the omission of the sensor in the hot water, and inspection of the measurement readings on the meter display, in the process of temperature changes on the sensor.

If the sensor works, the resistance level will gradually fall, depending on the temperature rise. If it is determined that the device is broken, it needs to be replaced with a new unit, such as the repair parts are not carried out. Gathering machine in reverse order.

Instructions: how to check the heating element in a washing machine

Check the operation of the washing machine and find out what is not working heating, it is not difficult, but the cause is not so easy. It is worth noting that often the washing machine is not working heating element, which is located both in front and in the rear.

To determine its location, you need:

  1. Perform a visual inspection of the washing machine from behind, as if the cap is large, it is likely to detail is there.
  2. If possible, put on side stiralku, viewing it from the bottom to prevent the location of PETN underneath.
  3. The most practical and the best one to determine the location of PETN is the removal of the back cover on the washing machine, it is not difficult to do. This will allow him to withdraw as much as possible simple, even if it is installed at the bottom.

If you need to check your tan, then first it must be carefully get out of the washing machineIf you need to check your tan, then first it must be carefully get out of the washing machine

Once found the location of PETN in stiralka need to ping the product, but before it can be simply removed. Check it, burned it, or can heat water, and can be on-site, but it is better to entrust the true professionals who have considerable experience, and most importantly, special equipment for the diagnosis.

Ten - it is fragile, and require maximum accuracy to the diagnosis of not to break it.

There are signs by which we can determine that PETN is faulty and needs replacement. If the body has black dots, then this indicates the presence of holes, and therefore categorically not want to use this item. Often on parts may be present scale, it is necessary to get rid of it, because it can hide the holes and thus cause damage to the washing machine. If, in order to disassemble the machine, there is no apparent reason, then you need to pay attention to the energy meter. In other words, the machine is switched into a mode is activated when its maximum power, and it is necessary to determine the change in the counter reading. If its speed increases significantly, the heating element is OK and copes with the task.

Before you ping the product, you need to inspect the integrity of the body to identify bubbles, scratches, cracks and other damages. If they are, then you need to replace the heating element. There is another option, in which you can use to discover the item for an open without a tester. To do this, use a test light electrician, which is quite done independently without recourse to experts. It is important that during the installation of PETN in place, it is required to carry out the work correctly and carefully as possible to prevent deviation of contacts from their rightful locations. If the heater is not installed properly, then it may be above the level of its previous locations. In this case, when you start the machine will open circuit or failure of the new.

Why is the washing machine does not heat the water (video)

The most important thing - it's not worth doing repairs stiralki if there are no special skills and special equipment for the diagnosis.