When damage to the washer need to find out the reason for this problemyPrezhde you panic, you need to identify the cause of stopping the unit and find out why he switched off during a wash things. If the scoreboard does not appear the program error, the reason lies in the guts of a washing machine.
The washing machine stops during a wash cycle: what are the reasons
With the advent of automatic machines for washing housewives life much simpler. Enough to load laundry into the drum, set the desired program - and an hour later you can get a clean well wrung things.
Accustomed to facilitate the process of washing machines owners get frustrated if during the operation of the unit detects a problem. The most obvious reason for hang the unit - disconnect the electricity or water supply. Upon resumption, the machine automatically turns on itself and starts where it left off.
Improper loading items or exceeding the maximum permissible weight for the drum could be one of the reasons why the washing machine hangs during the wash cycle
If this happened, you need to stop the program by force, drain the water and remove unnecessary items from the drum.
The reason for the stop of the drum during the wash cycle may be engine failure, the most important part of the washing machine. With this problem you need to contact the service center. Termination of the washing machine can be caused by a breakdown of the heating element - because of the inability to heat the washing water, the machine stops in the middle of the cycle. To repair the machine is best to call a specialist.
Why is a washing machine on the spin cycle crashes
In modern washing machines can be set to many different wash programs, but each of them ends clothes wringer, differs only in the power cutoffs. Quite often while scrolling clothes on the final stage may occur malfunction of the machine.
The most common problem during the spin - a sharp hang the washing machine.
The machine can output to display some system error description and solution of which can be found in the instructions to the unit, but it happens that the owners can not identify the problem.
In the washing machine may be technical problems - worn bearings or carbon brushes, the drive belt tension, failure of the electronic module
- Overloading the washing machine - in the aggregate is loaded too many things. During spinning reel spinning with great force and heavy items may result in damage to the drive mechanism.
- The drum is a big heavy thing - it can not uniformly distributed within the drum and slips in one direction, causing a problem of imbalance;
- Inside the tank jammed foreign body - it is very important before loading things in the car to check the pockets of the lack of detail, keys, headphones and other small objects that may fall. If this happens, you should immediately stop work stiralki and extract the subject.
- The selected program must be laid Spin feature.
Other problems can be diagnosed only dismantling the washing machine. It is best to give this work a specialist, especially if the machine is still under warranty.
The machine is not until the end of dostiryvaet: Troubleshooting
Current appliances ideal, and even super-expensive washing machine leading manufacturers, such as Samsung or Indesit, may occur malfunction. Of course, most problems occur due to improper operation of the unit.
Overloading the drum and the unequal distribution of things in it may be the first reason why the machine is no longer wash.
Very often the blockage in the drain hose, or the opening of the tank filter can cause the termination of operation of the washing machine.
If the machine is switched off in the final minute of washing, it may indicate a malfunction with TAN
Clean the drain filter under force even to a woman - it needs to unscrew the filter, which is located at the bottom of the washing machine. It needs to be well cleaned under running water, removing the brush scale or other contaminants.
Cause clogging may be a foreign body or dirt accumulated in the drain hose - residues powder, wool, threads, crumbs. Experts recommend periodically clean it to avoid blockages. To clean a drain hose to be disconnected from its pump previously draining excess water from the filter. Clean hose can be a thin metal wire.
Clean the drain pump or tank is better to give professionals that will eliminate the problem and check the rest of the parts for wear and tear and damage.
What if the washing machine stops in the rinse
In fact, the failure reasons can be several. Quite common cause malfunctions when hovering machine to drain the system - the drain pump, a filter or hoses. They can accumulate dust, powder or scum. Blockages must be removed and re-run the rinse mode.
Faulty pressure switch - special water level sensor may also be a reason for stopping the machine during the rinse.
When damage control module, which may be caused by sudden power surges, the washing machine may stop to rinse and wring. In this case, it is recommended to provide business professionals
It needs to be cleaned and set into place, after which the machine can continue to draw water, and rinse.
It is also a violation of the correct operation of the washing machine can be wear carbon brushes, which are easy to replace.
How to stop the washing machine during the wash cycle: right off (video)
With some damage to the washer can be easily cope on their own, but if you do not own certain knowledge, the repair of household appliances to provide the best professionals. After the repair, you get your assistant in working condition and with warranty repairs.