Plaster arch between the rooms will give your home a unique and kreativnostiSovremennye arch - Eastern tradition, or more precisely, Asian, which is firmly taken root in post-Soviet interior. Today arches species very much, but there are few of the most popular species that decorate the room.
Types of arches made of plasterboard in the hall
Design arches today impresses with its diversity. And not necessarily the complexity of the design suggests that its hard to do by hand. Important to ensure that the features of the arch structure are not contrary to the interior, which is combined with the arch trim, furniture and decor.
Choosing the arch for the room, you must take into account the design of rooms and its features
Popular types of arches:
- Square or round wide arch. It's a classic. They use it to a greater extent to increase the visual space in a small room. The round design is typically zoned room on the balcony or in the studio apartment. Suitable such arch for a classic style rooms with high ceilings.
- Asymmetric arches. They are not used as often are suitable for bold, interesting interior. This arch is distracting elements, for example, does not notice immediately that the low ceilings in the room.
- Arches in the modern style, smooth, with a truncated radius - they make the room visually larger.
- Poluarki. Usually constructed in the living room, complemented by decorative elements.
- Oriental. Characterized by a domed vault, which is usually found in the eastern interior.
The best place for the arch - the entrance to the kitchen, entrance into the living room. Arch in the living room have to be broad, without the effect of the expansion of space to do it does not make sense. At least in most cases. Doorways to create arches extend.
How to make an arch made of plasterboard with their hands
Drywall - an excellent material to work with them will be able to even those who did not call himself a master. But the material is not very strong and very fragile, because working with them requires some care. For the installation of such a structure, of course, need a framework.
Drywall is a rather fragile material, so working with them should be carefully and accurately
Materials and tools:
- Metal profiles;
- Putty knife;
- Shears for metal.
First you measure an existing opening, after which the arches with a view, you are going to do. Please rate and the level of humidity in the room, because the drywall can get water, curl. If you make an arch to the kitchen, it can be of special moisture-resistant drywall. He is inside the green layer. The special composition ensures that the drywall will serve you for a long time, without changing its shape.
Arch drywall: an algorithm of actions
Further, on a sheet of drywall you need to draw a selected view of the arch. If a pencil tied to a rope, get a compass. Not the first attempt can turn the drawing, but do it all the same is not so difficult. When the ideal shape is obtained, the workpiece is cut by means of a jigsaw.
Before placing the arch of the drywall, you must first make a model of the future arch on paper
After that, for the future to do the arch frame. To do this, cut off two profiles, their length is the width of the opening. They are fixed in the upper part. On every wall, too, need two pieces of profile, its length will depend on the model chosen. Profile fastened with screws.
Once the framework is ready, you can begin to trim the GCR. This is not finishing, but it still requires accuracy.
Proper design: how to decorate the arch in the hall with plasterboard
The first preform is applied to the opening, is attached to the metal profile screws. You can do this and a standard screwdriver, but if we use the screwdriver, the time you will spend much less. The size of the screws depends on the material thickness. Remember that the interval between the screws should not exceed 15 cm.
Original and stylish arch is able to accentuate the interior of the guest room
If the arch is painted or plastered, twist the screws need so that their hats were well deep into the drywall.
When both the workpiece fastened to the wall, it is time to fix the bent metal profile. Since this material does not bend very well, you will have to make cuts in order to give it the desired shape.
Incisions are made on the edges of the profile, after about every 10 cm. Then the profile to gently bend until such time as it does not coincide with the desired radius. He attached to the metal frame on both sides of the resulting opening.
Shutdown: arch made of plasterboard
Then plasterboard arches are screwed with screws to the new curved guide. What is this process - it will add structure rigidity, and so prepare the arch to the final stage of work. Then need to install cross-bridges between the walls. It is necessary for the strength of arches.
Completing the installation of arches made of drywall, be sure to properly fasten all the screws and install the cross-jumper
But to make the most difficult section of the arcuate bottom. If the radius is a large bending turns out not too strong, the material will provide the desired shape plain water. Plasterboard mono wet, and gradually curving, bolted to the side walls.
The rough work is complete, the joints are usually sealed with putty. Places where the screws are sealed very carefully. Arch often Wallpapers, allowing the most fit harmoniously into the interior of the image that has emerged in this room.
Arch made of plasterboard (video)
Plasterboard arches still relevant, still are popular due to the ease of working with the material and the availability of the whole process. Simple, beautiful and relatively quickly, and most importantly - everything can be done without the involvement of artists.
arch design of the drywall in the hall (the photo in the interior)